PAC-1218 Drop-In Beehive Valve Spring Sets for all LS Engines - .600" Lift Rated

Description

Description: The PAC-1218 Spring Kit is a drop-in high performance spring kit for all OE LS cylinder heads and is rated for up to .600" lift.  This spring kit uses all OE hardware, including seats, retainers, and locks and is 100% drop-in.  The PAC-1218s are an ovate beehive spring that has increased loads, rates and frequencies for more aggressive cams. This is a full set of 16 springs.
tuning_race_hero
PAC-1218 Drop-In Beehive Valve Spring Sets for all LS Engines - .600" Lift Rated
Description:
The PAC-1218 Spring Kit is a drop-in high performance spring kit for all OE LS cylinder heads and is rated for up to .600" lift.  This spring kit uses all OE hardware, including seats, retainers, and locks and is 100% drop-in.  The PAC-1218s are an ovate beehive spring that has increased loads, rates and frequencies for more aggressive cams. This is a full set of 16 springs.
Specification:
Number of Springs Per Valve: Single
Outside Diameter of Outer Spring (in): 1.290 in.
Coil Bind Height (in): 1.140 in.
Damper Spring Included: No
Install Load: 130lbs
Install Height: 1.800"
Open Height: 1.175"
Open Load: 318 lbs
Spring Rate (lbs/in): 313 lbs./in.
Inside Diameter of Outer Spring (in): 0.885 in.
Valve Spring Style: Beehive
Package included:
1X PAC-1218 Drop-In Beehive Valve Spring Kit
Item Specifics
UPC :
Does not apply
Brand :
Carbole
Manufacturer Part Number :
PAC-1218
Material :
Steel
Type :
Single Valve Spring
Fitment Type :
Direct Replacement
Warranty :
Yes
Interchange Part Number :
1218
Engine :
LS1, LS2, LS3, LS6, LQ4, LQ9, 4.8, 5.3, 5.7, 6.0, 6.2
Model :
Silverado, Sierra, Camaro, Corvette, TBSS, CTS-V, GTO, LM7, GM
Valve Spring Style :
Beehive
Custom Bundle :
No
Inside Diameter of Outer Spring (in) :
0.885 in.
Spring Rate (lbs/in) :
313 lbs./in.
Modified Item :
No
Open Load :
318 lbs
Open Height :
1.175"
Install Height :
1.800"
Install Load :
130lbs
Coil Bind Height (in) :
1.140 in.
Number of Springs Per Valve :
Single
Outside Diameter of Outer Spring (in) :
1.290 in.
Placement on Vehicle :
Front, Rear, Left, Right
Other Part Number :
SE-PAC1218
Vehicle Type :
LS1, LS2, LS3, LS6 Car, Truck & SUV
Color :
As picture shown
Payment
Payment:
We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal.
A
dditional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user.
Shipping
Processing time: Within 2 business day after payment
Ship from:
California USA
or KY Warehouse Or IL warehouse Or NY Warehouse.
Time of delivery:
US: about
1-6
business days;
Note：Please leave us your detailed valid street address because big package is not allowed to be stored in PO.BOX.
Returns
1）Defective product can be returned for exchange and the exchange must be notified within
30 days
from the date of purchase. All items must be returned in NEW condition, including the packaging and all accessories.
2）Buyers are responsible for the item return shipping fee.
3)
Please note that all return must be pre-approved by our co-worker,and it have a return merchandise anthorization(RMA)number.Unauthorzed return will not be accepted.
About Us
Precision Auto Labs (PAL) is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world. PAL offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires etc. PAL products are 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance. 100% Quality Guarantee! 100% Fast Delivery! 100% Money Back Guarantee!
PAL produces the coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils.
1. Wire--Imported from German Elektrisoal, top quality in the world.
2. Epoxy-- Imported from German Elektrisoal, top quality high insulation epoxy.
3. Plastic GE Valox resin, professional high voltage di-electric resistant resin.
4. Manufactured in facility TS16949 quality control system certified.
5. Enable to Keep Releasing energy over 6000 RPM.
6. Continuous Ignition.
7. Ignition Coil Born For Racing
Contact us
1) Please feel free to contact if you have any problem, we’ll reply ASAP.
2) We greatly appreciate your
Five Stars Positive
feedback. It means a lot to us. Thanks for your support.
tuning_race_hero
Hot Sale
VTEC Solenoid Spool Valve 917-281 For 1998-2002 Honda Accord Acura 4 Cyl EX 2.3L
USD 39.99
VTEC Solenoid Spool Valve For Honda Civic 2001-2005 EX HX SOHC 1.7L 15810PLRA01
USD 38.57
VTEC Solenoid Spool Valve For 1998 1999 2000 2001 2002 Honda Accord Acura 2.3L
USD 39.99
PAC-1218 Drop-In Beehive Valve Spring Sets for all LS Engines - .600" Lift Rated
USD 139.99
VTEC Solenoid Spool Valve For Honda Civic 1.7L 2001 2002 2003 2004 2005 15810PLR
USD 38.57
New Arrival
6X Fuel Injectors Upgrade Bosch 0280155784 For Jeep TJ & Cherokee 4.0L 1999-2004
USD 43.99
2 AC A/C Heat Heater Fan Air Vent Blend Door Actuator For Chevy GMC Pickup Truck
USD 42.45
DG508 Ignition Coils 8 Pack For Ford F150 F250 F550 Lincoln V8 4.6L 5.4L FD503
USD 37.59
917281 15810PAAA02 VTEC Solenoid Spool Valve For Honda Accord Odyssey Acura 4Cyl
USD 39.99
3/8"x300' Twisted Three Strand Braid Nylon Anchor Rope Boat 5850LB & Thimble NEW
USD 39.99
PAC-1218 Drop-In Beehive Valve Spring Sets for all LS Engines - .600" Lift Rated
Description:
The PAC-1218 Spring Kit is a drop-in high performance spring kit for all OE LS cylinder heads and is rated for up to .600" lift.  This spring kit uses all OE hardware, including seats, retainers, and locks and is 100% drop-in.  The PAC-1218s are an ovate beehive spring that has increased loads, rates and frequencies for more aggressive cams. This is a full set of 16 springs.
Specification:
Number of Springs Per Valve: Single
Outside Diameter of Outer Spring (in): 1.290 in.
Coil Bind Height (in): 1.140 in.
Damper Spring Included: No
Install Load: 130lbs
Install Height: 1.800"
Open Height: 1.175"
Open Load: 318 lbs
Spring Rate (lbs/in): 313 lbs./in.
Inside Diameter of Outer Spring (in): 0.885 in.
Valve Spring Style: Beehive
Package included:
1X PAC-1218 Drop-In Beehive Valve Spring Kit
Item Specifics
Brand :
Carbole
Manufacturer Part Number :
PAC-1218
Material :
Steel
Type :
Single Valve Spring
Fitment Type :
Direct Replacement
Warranty :
Yes
Interchange Part Number :
1218
Engine :
LS1, LS2, LS3, LS6, LQ4, LQ9, 4.8, 5.3, 5.7, 6.0, 6.2
Model :
Silverado, Sierra, Camaro, Corvette, TBSS, CTS-V, GTO, LM7, GM
Valve Spring Style :
Beehive
Custom Bundle :
No
Inside Diameter of Outer Spring (in) :
0.885 in.
Spring Rate (lbs/in) :
313 lbs./in.
Modified Item :
No
Open Load :
318 lbs
Open Height :
1.175"
Install Height :
1.800"
Install Load :
130lbs
Coil Bind Height (in) :
1.140 in.
Number of Springs Per Valve :
Single
Outside Diameter of Outer Spring (in) :
1.290 in.
Placement on Vehicle :
Front, Rear, Left, Right
Other Part Number :
SE-PAC1218
Vehicle Type :
LS1, LS2, LS3, LS6 Car, Truck & SUV
Color :
As picture shown
Payment
Shipping
Returns
About Us
Contact us
Payment:
We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal.
A
dditional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user.
Processing time: Within 2 business day after payment
Ship from:
California USA
or KY Warehouse Or IL warehouse Or NY Warehouse.
Time of delivery:
US: about
1-6
business days;
Note：Please leave us your detailed valid street address because big package is not allowed to be stored in PO.BOX.
1）Defective product can be returned for exchange and the exchange must be notified within
30 days
from the date of purchase. All items must be returned in NEW condition, including the packaging and all accessories.
2）Buyers are responsible for the item return shipping fee.
3)
Please note that all return must be pre-approved by our co-worker,and it have a return merchandise anthorization(RMA)number.Unauthorzed return will not be accepted.
Precision Auto Labs (PAL) is one of the most experienced manufacturers in performance fuel and ignition systems around the world, proving itself on the racetracks and drag strips of the world. PAL offers a comprehensive selection of performance products, including coils, digital fuel injection systems, fuel injectors, distributors, caps, rotors, ignition wires etc. PAL products are 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance. 100% Quality Guarantee! 100% Fast Delivery! 100% Money Back Guarantee!
PAL produces the coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils.
1. Wire--Imported from German Elektrisoal, top quality in the world.
2. Epoxy-- Imported from German Elektrisoal, top quality high insulation epoxy.
3. Plastic GE Valox resin, professional high voltage di-electric resistant resin.
4. Manufactured in facility TS16949 quality control system certified.
5. Enable to Keep Releasing energy over 6000 RPM.
6. Continuous Ignition.
7. Ignition Coil Born For Racing
1) Please feel free to contact if you have any problem, we’ll reply ASAP.
2) We greatly appreciate your
Five Stars Positive
feedback. It means a lot to us. Thanks for your support.
All right reserved.